VTK
9.1.0
|
Imprint the contact surface of one object onto another surface. More...
#include <vtkImprintFilter.h>
Public Types | |
enum | MergeTolType { ABSOLUTE = 0 , RELATIVE_TO_PROJECTION_TOLERANCE = 1 , RELATIVE_TO_MIN_EDGE_LENGTH = 2 } |
enum | SpecifiedOutput { TARGET_CELLS = 0 , IMPRINTED_CELLS = 1 , PROJECTED_IMPRINT = 2 , IMPRINTED_REGION = 3 , MERGED_IMPRINT = 5 } |
enum | DebugOutput { NO_DEBUG_OUTPUT = 0 , TRIANGULATION_INPUT = 1 , TRIANGULATION_OUTPUT = 2 } |
Public Types inherited from vtkPolyDataAlgorithm | |
typedef vtkAlgorithm | Superclass |
Public Types inherited from vtkAlgorithm | |
enum | DesiredOutputPrecision { SINGLE_PRECISION , DOUBLE_PRECISION , DEFAULT_PRECISION } |
Values used for setting the desired output precision for various algorithms. More... | |
typedef vtkObject | Superclass |
Public Member Functions | |
void | SetTargetConnection (vtkAlgorithmOutput *algOutput) |
Specify the first vtkPolyData input connection which defines the surface mesh to imprint (i.e., the target). | |
vtkAlgorithmOutput * | GetTargetConnection () |
void | SetImprintConnection (vtkAlgorithmOutput *algOutput) |
Specify the a second vtkPolyData input connection which defines the surface mesh with which to imprint the target (the target is provided by the first input). | |
vtkAlgorithmOutput * | GetImprintConnection () |
void | SetTargetData (vtkDataObject *target) |
Specify the first vtkPolyData input which defines the surface mesh to imprint (i.e., the taregt). | |
vtkDataObject * | GetTarget () |
Specify the first vtkPolyData input which defines the surface mesh to imprint (i.e., the taregt). | |
void | SetImprintData (vtkDataObject *imprint) |
Specify the a second vtkPolyData input which defines the surface mesh with which to imprint the target (i.e., the first input). | |
vtkDataObject * | GetImprint () |
Specify the a second vtkPolyData input which defines the surface mesh with which to imprint the target (i.e., the first input). | |
virtual void | SetTolerance (double) |
Specify a projection tolerance which controls how close the imprint surface must be to the target to successfully imprint the surface. | |
virtual double | GetTolerance () |
Specify a projection tolerance which controls how close the imprint surface must be to the target to successfully imprint the surface. | |
virtual void | SetMergeToleranceType (int) |
Specify a tolerance which is used to determine whether two points are considered coincident to one another. | |
virtual int | GetMergeToleranceType () |
Specify a tolerance which is used to determine whether two points are considered coincident to one another. | |
void | SetMergeToleranceTypeToAbsolute () |
Specify a tolerance which is used to determine whether two points are considered coincident to one another. | |
void | SetMergeToleranceTypeToRelativeToProjection () |
Specify a tolerance which is used to determine whether two points are considered coincident to one another. | |
void | SetMergeToleranceTypeToMinEdge () |
Specify a tolerance which is used to determine whether two points are considered coincident to one another. | |
virtual void | SetMergeTolerance (double) |
Specify a tolerance which is used to determine whether two points are considered coincident to one another. | |
virtual double | GetMergeTolerance () |
Specify a tolerance which is used to determine whether two points are considered coincident to one another. | |
virtual void | SetOutputType (int) |
Control what is output by the filter. | |
virtual int | GetOutputType () |
Control what is output by the filter. | |
void | SetOutputTypeToTargetCells () |
Control what is output by the filter. | |
void | SetOutputTypeToImprintedCells () |
Control what is output by the filter. | |
void | SetOutputTypeToProjectedImprint () |
Control what is output by the filter. | |
void | SetOutputTypeToImprintedRegion () |
Control what is output by the filter. | |
void | SetOutputTypeToMergedImprint () |
Control what is output by the filter. | |
virtual void | SetBoundaryEdgeInsertion (bool) |
Indicate whether to insert just the boundary edges of the imprint mesh (i.e., do not insert the interior edges). | |
virtual bool | GetBoundaryEdgeInsertion () |
Indicate whether to insert just the boundary edges of the imprint mesh (i.e., do not insert the interior edges). | |
virtual void | BoundaryEdgeInsertionOn () |
Indicate whether to insert just the boundary edges of the imprint mesh (i.e., do not insert the interior edges). | |
virtual void | BoundaryEdgeInsertionOff () |
Indicate whether to insert just the boundary edges of the imprint mesh (i.e., do not insert the interior edges). | |
virtual void | SetTriangulateOutput (bool) |
Indicate whether the output should be triangulated. | |
virtual bool | GetTriangulateOutput () |
Indicate whether the output should be triangulated. | |
virtual void | TriangulateOutputOn () |
Indicate whether the output should be triangulated. | |
virtual void | TriangulateOutputOff () |
Indicate whether the output should be triangulated. | |
virtual void | SetDebugOutputType (int) |
The following methods support debugging. | |
virtual int | GetDebugOutputType () |
Indicate whether the output should be triangulated. | |
void | SetDebugOutputTypeToNoDebugOutput () |
Indicate whether the output should be triangulated. | |
void | SetDebugOutputTypeToTriangulationInput () |
Indicate whether the output should be triangulated. | |
void | SetDebugOutputTypeToTriangulationOutput () |
Indicate whether the output should be triangulated. | |
virtual void | SetDebugCellId (vtkIdType) |
Indicate whether the output should be triangulated. | |
virtual vtkIdType | GetDebugCellId () |
Indicate whether the output should be triangulated. | |
vtkPolyData * | GetDebugOutput () |
Get the output data (in the second output, if the DebugOutput != NO_DEBUG_OUTPUT). | |
Public Member Functions inherited from vtkPolyDataAlgorithm | |
virtual vtkTypeBool | IsA (const char *type) |
Return 1 if this class is the same type of (or a subclass of) the named class. | |
vtkPolyDataAlgorithm * | NewInstance () const |
void | PrintSelf (ostream &os, vtkIndent indent) override |
Methods invoked by print to print information about the object including superclasses. | |
vtkTypeBool | ProcessRequest (vtkInformation *, vtkInformationVector **, vtkInformationVector *) override |
see vtkAlgorithm for details | |
vtkDataObject * | GetInput () |
vtkDataObject * | GetInput (int port) |
vtkPolyData * | GetPolyDataInput (int port) |
vtkPolyData * | GetOutput () |
Get the output data object for a port on this algorithm. | |
vtkPolyData * | GetOutput (int) |
Get the output data object for a port on this algorithm. | |
virtual void | SetOutput (vtkDataObject *d) |
Get the output data object for a port on this algorithm. | |
void | SetInputData (vtkDataObject *) |
Assign a data object as input. | |
void | SetInputData (int, vtkDataObject *) |
Assign a data object as input. | |
void | AddInputData (vtkDataObject *) |
Assign a data object as input. | |
void | AddInputData (int, vtkDataObject *) |
Assign a data object as input. | |
Public Member Functions inherited from vtkAlgorithm | |
virtual vtkTypeBool | IsA (const char *type) |
Return 1 if this class is the same type of (or a subclass of) the named class. | |
vtkAlgorithm * | NewInstance () const |
void | PrintSelf (ostream &os, vtkIndent indent) override |
Methods invoked by print to print information about the object including superclasses. | |
int | HasExecutive () |
Check whether this algorithm has an assigned executive. | |
vtkExecutive * | GetExecutive () |
Get this algorithm's executive. | |
virtual void | SetExecutive (vtkExecutive *executive) |
Set this algorithm's executive. | |
virtual vtkTypeBool | ProcessRequest (vtkInformation *request, vtkInformationVector **inInfo, vtkInformationVector *outInfo) |
Upstream/Downstream requests form the generalized interface through which executives invoke a algorithm's functionality. | |
vtkTypeBool | ProcessRequest (vtkInformation *request, vtkCollection *inInfo, vtkInformationVector *outInfo) |
Version of ProcessRequest() that is wrapped. | |
virtual int | ComputePipelineMTime (vtkInformation *request, vtkInformationVector **inInfoVec, vtkInformationVector *outInfoVec, int requestFromOutputPort, vtkMTimeType *mtime) |
A special version of ProcessRequest meant specifically for the pipeline modified time request. | |
virtual int | ModifyRequest (vtkInformation *request, int when) |
This method gives the algorithm a chance to modify the contents of a request before or after (specified in the when argument) it is forwarded. | |
vtkInformation * | GetInputPortInformation (int port) |
Get the information object associated with an input port. | |
vtkInformation * | GetOutputPortInformation (int port) |
Get the information object associated with an output port. | |
int | GetNumberOfInputPorts () |
Get the number of input ports used by the algorithm. | |
int | GetNumberOfOutputPorts () |
Get the number of output ports provided by the algorithm. | |
void | SetProgress (double) |
SetProgress is deprecated. | |
void | UpdateProgress (double amount) |
Update the progress of the process object. | |
virtual void | SetInputArrayToProcess (int idx, int port, int connection, const char *fieldAssociation, const char *attributeTypeorName) |
String based versions of SetInputArrayToProcess(). | |
vtkInformation * | GetInputArrayInformation (int idx) |
Get the info object for the specified input array to this algorithm. | |
void | RemoveAllInputs () |
Remove all the input data. | |
vtkDataObject * | GetOutputDataObject (int port) |
Get the data object that will contain the algorithm output for the given port. | |
vtkDataObject * | GetInputDataObject (int port, int connection) |
Get the data object that will contain the algorithm input for the given port and given connection. | |
virtual void | RemoveInputConnection (int port, vtkAlgorithmOutput *input) |
Remove a connection from the given input port index. | |
virtual void | RemoveInputConnection (int port, int idx) |
Remove a connection given by index idx. | |
virtual void | RemoveAllInputConnections (int port) |
Removes all input connections. | |
virtual void | SetInputDataObject (int port, vtkDataObject *data) |
Sets the data-object as an input on the given port index. | |
virtual void | SetInputDataObject (vtkDataObject *data) |
virtual void | AddInputDataObject (int port, vtkDataObject *data) |
Add the data-object as an input to this given port. | |
virtual void | AddInputDataObject (vtkDataObject *data) |
vtkAlgorithmOutput * | GetOutputPort (int index) |
Get a proxy object corresponding to the given output port of this algorithm. | |
vtkAlgorithmOutput * | GetOutputPort () |
int | GetNumberOfInputConnections (int port) |
Get the number of inputs currently connected to a port. | |
int | GetTotalNumberOfInputConnections () |
Get the total number of inputs for this algorithm. | |
vtkAlgorithmOutput * | GetInputConnection (int port, int index) |
Get the algorithm output port connected to an input port. | |
vtkAlgorithm * | GetInputAlgorithm (int port, int index, int &algPort) |
Returns the algorithm and the output port index of that algorithm connected to a port-index pair. | |
vtkAlgorithm * | GetInputAlgorithm (int port, int index) |
Returns the algorithm connected to a port-index pair. | |
vtkAlgorithm * | GetInputAlgorithm () |
Equivalent to GetInputAlgorithm(0, 0). | |
vtkExecutive * | GetInputExecutive (int port, int index) |
Returns the executive associated with a particular input connection. | |
vtkExecutive * | GetInputExecutive () |
Equivalent to GetInputExecutive(0, 0) | |
vtkInformation * | GetInputInformation (int port, int index) |
Return the information object that is associated with a particular input connection. | |
vtkInformation * | GetInputInformation () |
Equivalent to GetInputInformation(0, 0) | |
vtkInformation * | GetOutputInformation (int port) |
Return the information object that is associated with a particular output port. | |
virtual vtkTypeBool | Update (int port, vtkInformationVector *requests) |
This method enables the passing of data requests to the algorithm to be used during execution (in addition to bringing a particular port up-to-date). | |
virtual vtkTypeBool | Update (vtkInformation *requests) |
Convenience method to update an algorithm after passing requests to its first output port. | |
virtual int | UpdatePiece (int piece, int numPieces, int ghostLevels, const int extents[6]=nullptr) |
Convenience method to update an algorithm after passing requests to its first output port. | |
virtual int | UpdateExtent (const int extents[6]) |
Convenience method to update an algorithm after passing requests to its first output port. | |
virtual int | UpdateTimeStep (double time, int piece=-1, int numPieces=1, int ghostLevels=0, const int extents[6]=nullptr) |
Convenience method to update an algorithm after passing requests to its first output port. | |
virtual void | UpdateInformation () |
Bring the algorithm's information up-to-date. | |
virtual void | UpdateDataObject () |
Create output object(s). | |
virtual void | PropagateUpdateExtent () |
Propagate meta-data upstream. | |
virtual void | UpdateWholeExtent () |
Bring this algorithm's outputs up-to-date. | |
void | ConvertTotalInputToPortConnection (int ind, int &port, int &conn) |
Convenience routine to convert from a linear ordering of input connections to a port/connection pair. | |
virtual vtkInformation * | GetInformation () |
Set/Get the information object associated with this algorithm. | |
virtual void | SetInformation (vtkInformation *) |
Set/Get the information object associated with this algorithm. | |
void | Register (vtkObjectBase *o) override |
Participate in garbage collection. | |
void | UnRegister (vtkObjectBase *o) override |
Participate in garbage collection. | |
virtual void | SetAbortExecute (vtkTypeBool) |
Set/Get the AbortExecute flag for the process object. | |
virtual vtkTypeBool | GetAbortExecute () |
Set/Get the AbortExecute flag for the process object. | |
virtual void | AbortExecuteOn () |
Set/Get the AbortExecute flag for the process object. | |
virtual void | AbortExecuteOff () |
Set/Get the AbortExecute flag for the process object. | |
virtual double | GetProgress () |
Get the execution progress of a process object. | |
void | SetProgressShiftScale (double shift, double scale) |
Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called. | |
virtual double | GetProgressShift () |
Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called. | |
virtual double | GetProgressScale () |
Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called. | |
void | SetProgressText (const char *ptext) |
Set the current text message associated with the progress state. | |
virtual char * | GetProgressText () |
Set the current text message associated with the progress state. | |
virtual unsigned long | GetErrorCode () |
The error code contains a possible error that occurred while reading or writing the file. | |
virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, const char *name) |
Set the input data arrays that this algorithm will process. | |
virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, int fieldAttributeType) |
Set the input data arrays that this algorithm will process. | |
virtual void | SetInputArrayToProcess (int idx, vtkInformation *info) |
Set the input data arrays that this algorithm will process. | |
virtual void | SetInputConnection (int port, vtkAlgorithmOutput *input) |
Set the connection for the given input port index. | |
virtual void | SetInputConnection (vtkAlgorithmOutput *input) |
Set the connection for the given input port index. | |
virtual void | AddInputConnection (int port, vtkAlgorithmOutput *input) |
Add a connection to the given input port index. | |
virtual void | AddInputConnection (vtkAlgorithmOutput *input) |
Add a connection to the given input port index. | |
virtual void | Update (int port) |
Bring this algorithm's outputs up-to-date. | |
virtual void | Update () |
Bring this algorithm's outputs up-to-date. | |
virtual void | SetReleaseDataFlag (int) |
Turn release data flag on or off for all output ports. | |
virtual int | GetReleaseDataFlag () |
Turn release data flag on or off for all output ports. | |
void | ReleaseDataFlagOn () |
Turn release data flag on or off for all output ports. | |
void | ReleaseDataFlagOff () |
Turn release data flag on or off for all output ports. | |
int | UpdateExtentIsEmpty (vtkInformation *pinfo, vtkDataObject *output) |
This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. | |
int | UpdateExtentIsEmpty (vtkInformation *pinfo, int extentType) |
This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. | |
int * | GetUpdateExtent () |
These functions return the update extent for output ports that use 3D extents. | |
int * | GetUpdateExtent (int port) |
These functions return the update extent for output ports that use 3D extents. | |
void | GetUpdateExtent (int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
These functions return the update extent for output ports that use 3D extents. | |
void | GetUpdateExtent (int port, int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
These functions return the update extent for output ports that use 3D extents. | |
void | GetUpdateExtent (int extent[6]) |
These functions return the update extent for output ports that use 3D extents. | |
void | GetUpdateExtent (int port, int extent[6]) |
These functions return the update extent for output ports that use 3D extents. | |
int | GetUpdatePiece () |
These functions return the update extent for output ports that use piece extents. | |
int | GetUpdatePiece (int port) |
These functions return the update extent for output ports that use piece extents. | |
int | GetUpdateNumberOfPieces () |
These functions return the update extent for output ports that use piece extents. | |
int | GetUpdateNumberOfPieces (int port) |
These functions return the update extent for output ports that use piece extents. | |
int | GetUpdateGhostLevel () |
These functions return the update extent for output ports that use piece extents. | |
int | GetUpdateGhostLevel (int port) |
These functions return the update extent for output ports that use piece extents. | |
void | SetProgressObserver (vtkProgressObserver *) |
If an ProgressObserver is set, the algorithm will report progress through it rather than directly. | |
virtual vtkProgressObserver * | GetProgressObserver () |
If an ProgressObserver is set, the algorithm will report progress through it rather than directly. | |
Public Member Functions inherited from vtkObject | |
vtkBaseTypeMacro (vtkObject, vtkObjectBase) | |
virtual void | DebugOn () |
Turn debugging output on. | |
virtual void | DebugOff () |
Turn debugging output off. | |
bool | GetDebug () |
Get the value of the debug flag. | |
void | SetDebug (bool debugFlag) |
Set the value of the debug flag. | |
virtual void | Modified () |
Update the modification time for this object. | |
virtual vtkMTimeType | GetMTime () |
Return this object's modified time. | |
void | PrintSelf (ostream &os, vtkIndent indent) override |
Methods invoked by print to print information about the object including superclasses. | |
void | RemoveObserver (unsigned long tag) |
void | RemoveObservers (unsigned long event) |
void | RemoveObservers (const char *event) |
void | RemoveAllObservers () |
vtkTypeBool | HasObserver (unsigned long event) |
vtkTypeBool | HasObserver (const char *event) |
int | InvokeEvent (unsigned long event) |
int | InvokeEvent (const char *event) |
unsigned long | AddObserver (unsigned long event, vtkCommand *, float priority=0.0f) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. | |
unsigned long | AddObserver (const char *event, vtkCommand *, float priority=0.0f) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. | |
vtkCommand * | GetCommand (unsigned long tag) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. | |
void | RemoveObserver (vtkCommand *) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. | |
void | RemoveObservers (unsigned long event, vtkCommand *) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. | |
void | RemoveObservers (const char *event, vtkCommand *) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. | |
vtkTypeBool | HasObserver (unsigned long event, vtkCommand *) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. | |
vtkTypeBool | HasObserver (const char *event, vtkCommand *) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. | |
template<class U , class T > | |
unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f) |
Overloads to AddObserver that allow developers to add class member functions as callbacks for events. | |
template<class U , class T > | |
unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
Overloads to AddObserver that allow developers to add class member functions as callbacks for events. | |
template<class U , class T > | |
unsigned long | AddObserver (unsigned long event, U observer, bool(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
Allow user to set the AbortFlagOn() with the return value of the callback method. | |
int | InvokeEvent (unsigned long event, void *callData) |
This method invokes an event and return whether the event was aborted or not. | |
int | InvokeEvent (const char *event, void *callData) |
This method invokes an event and return whether the event was aborted or not. | |
Public Member Functions inherited from vtkObjectBase | |
const char * | GetClassName () const |
Return the class name as a string. | |
virtual vtkTypeBool | IsA (const char *name) |
Return 1 if this class is the same type of (or a subclass of) the named class. | |
virtual vtkIdType | GetNumberOfGenerationsFromBase (const char *name) |
Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). | |
virtual void | Delete () |
Delete a VTK object. | |
virtual void | FastDelete () |
Delete a reference to this object. | |
void | InitializeObjectBase () |
void | Print (ostream &os) |
Print an object to an ostream. | |
virtual void | Register (vtkObjectBase *o) |
Increase the reference count (mark as used by another object). | |
virtual void | UnRegister (vtkObjectBase *o) |
Decrease the reference count (release by another object). | |
int | GetReferenceCount () |
Return the current reference count of this object. | |
void | SetReferenceCount (int) |
Sets the reference count. | |
bool | GetIsInMemkind () const |
A local state flag that remembers whether this object lives in the normal or extended memory space. | |
virtual void | PrintHeader (ostream &os, vtkIndent indent) |
Methods invoked by print to print information about the object including superclasses. | |
virtual void | PrintTrailer (ostream &os, vtkIndent indent) |
Methods invoked by print to print information about the object including superclasses. | |
Protected Member Functions | |
vtkImprintFilter () | |
~vtkImprintFilter () override | |
double | ComputeMergeTolerance (vtkPolyData *pdata) |
int | RequestData (vtkInformation *, vtkInformationVector **, vtkInformationVector *) override |
This is called by the superclass. | |
int | RequestUpdateExtent (vtkInformation *, vtkInformationVector **, vtkInformationVector *) override |
This is called by the superclass. | |
Protected Member Functions inherited from vtkPolyDataAlgorithm | |
virtual vtkObjectBase * | NewInstanceInternal () const |
vtkPolyDataAlgorithm () | |
~vtkPolyDataAlgorithm () override | |
virtual int | RequestInformation (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) |
virtual int | RequestData (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) |
This is called by the superclass. | |
virtual int | RequestUpdateExtent (vtkInformation *, vtkInformationVector **, vtkInformationVector *) |
This is called by the superclass. | |
int | FillOutputPortInformation (int port, vtkInformation *info) override |
Fill the output port information objects for this algorithm. | |
int | FillInputPortInformation (int port, vtkInformation *info) override |
Fill the input port information objects for this algorithm. | |
Protected Member Functions inherited from vtkAlgorithm | |
virtual vtkObjectBase * | NewInstanceInternal () const |
vtkAlgorithm () | |
~vtkAlgorithm () override | |
virtual int | FillInputPortInformation (int port, vtkInformation *info) |
Fill the input port information objects for this algorithm. | |
virtual int | FillOutputPortInformation (int port, vtkInformation *info) |
Fill the output port information objects for this algorithm. | |
virtual void | SetNumberOfInputPorts (int n) |
Set the number of input ports used by the algorithm. | |
virtual void | SetNumberOfOutputPorts (int n) |
Set the number of output ports provided by the algorithm. | |
int | InputPortIndexInRange (int index, const char *action) |
int | OutputPortIndexInRange (int index, const char *action) |
int | GetInputArrayAssociation (int idx, vtkInformationVector **inputVector) |
Get the assocition of the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. | |
vtkInformation * | GetInputArrayFieldInformation (int idx, vtkInformationVector **inputVector) |
This method takes in an index (as specified in SetInputArrayToProcess) and a pipeline information vector. | |
virtual vtkExecutive * | CreateDefaultExecutive () |
Create a default executive. | |
void | ReportReferences (vtkGarbageCollector *) override |
virtual void | SetNthInputConnection (int port, int index, vtkAlgorithmOutput *input) |
Replace the Nth connection on the given input port. | |
virtual void | SetNumberOfInputConnections (int port, int n) |
Set the number of input connections on the given input port. | |
void | SetInputDataInternal (int port, vtkDataObject *input) |
These methods are used by subclasses to implement methods to set data objects directly as input. | |
void | AddInputDataInternal (int port, vtkDataObject *input) |
int | GetInputArrayAssociation (int idx, int connection, vtkInformationVector **inputVector) |
Filters that have multiple connections on one port can use this signature. | |
int | GetInputArrayAssociation (int idx, vtkDataObject *input) |
Filters that have multiple connections on one port can use this signature. | |
vtkDataArray * | GetInputArrayToProcess (int idx, vtkInformationVector **inputVector) |
Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. | |
vtkDataArray * | GetInputArrayToProcess (int idx, vtkInformationVector **inputVector, int &association) |
Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. | |
vtkDataArray * | GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector) |
Filters that have multiple connections on one port can use this signature. | |
vtkDataArray * | GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association) |
Filters that have multiple connections on one port can use this signature. | |
vtkDataArray * | GetInputArrayToProcess (int idx, vtkDataObject *input) |
Filters that have multiple connections on one port can use this signature. | |
vtkDataArray * | GetInputArrayToProcess (int idx, vtkDataObject *input, int &association) |
Filters that have multiple connections on one port can use this signature. | |
vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector) |
Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. | |
vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector, int &association) |
Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. | |
vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector) |
Filters that have multiple connections on one port can use this signature. | |
vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association) |
Filters that have multiple connections on one port can use this signature. | |
vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkDataObject *input) |
Filters that have multiple connections on one port can use this signature. | |
vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkDataObject *input, int &association) |
Filters that have multiple connections on one port can use this signature. | |
virtual void | SetErrorCode (unsigned long) |
The error code contains a possible error that occurred while reading or writing the file. | |
Protected Member Functions inherited from vtkObject | |
vtkObject () | |
~vtkObject () override | |
void | RegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
void | UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
void | InternalGrabFocus (vtkCommand *mouseEvents, vtkCommand *keypressEvents=nullptr) |
These methods allow a command to exclusively grab all events. | |
void | InternalReleaseFocus () |
These methods allow a command to exclusively grab all events. | |
Protected Member Functions inherited from vtkObjectBase | |
vtkObjectBase () | |
virtual | ~vtkObjectBase () |
virtual void | RegisterInternal (vtkObjectBase *, vtkTypeBool check) |
virtual void | UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) |
virtual void | ReportReferences (vtkGarbageCollector *) |
vtkObjectBase (const vtkObjectBase &) | |
void | operator= (const vtkObjectBase &) |
Protected Attributes | |
double | Tolerance |
double | MergeTolerance |
int | MergeToleranceType |
int | OutputType |
bool | BoundaryEdgeInsertion |
bool | TriangulateOutput |
int | DebugOutputType |
vtkIdType | DebugCellId |
Protected Attributes inherited from vtkAlgorithm | |
vtkInformation * | Information |
double | Progress |
char * | ProgressText |
vtkProgressObserver * | ProgressObserver |
unsigned long | ErrorCode |
The error code contains a possible error that occurred while reading or writing the file. | |
Protected Attributes inherited from vtkObject | |
bool | Debug |
vtkTimeStamp | MTime |
vtkSubjectHelper * | SubjectHelper |
Protected Attributes inherited from vtkObjectBase | |
std::atomic< int32_t > | ReferenceCount |
vtkWeakPointerBase ** | WeakPointers |
typedef vtkPolyDataAlgorithm | Superclass |
Standard methods to instantiate, print and provide type information. | |
static vtkImprintFilter * | New () |
Standard methods to instantiate, print and provide type information. | |
static vtkTypeBool | IsTypeOf (const char *type) |
Standard methods to instantiate, print and provide type information. | |
static vtkImprintFilter * | SafeDownCast (vtkObjectBase *o) |
Standard methods to instantiate, print and provide type information. | |
virtual vtkTypeBool | IsA (const char *type) |
Standard methods to instantiate, print and provide type information. | |
vtkImprintFilter * | NewInstance () const |
Standard methods to instantiate, print and provide type information. | |
void | PrintSelf (ostream &os, vtkIndent indent) override |
Standard methods to instantiate, print and provide type information. | |
virtual vtkObjectBase * | NewInstanceInternal () const |
Standard methods to instantiate, print and provide type information. | |
Additional Inherited Members | |
Static Public Member Functions inherited from vtkPolyDataAlgorithm | |
static vtkPolyDataAlgorithm * | New () |
static vtkTypeBool | IsTypeOf (const char *type) |
static vtkPolyDataAlgorithm * | SafeDownCast (vtkObjectBase *o) |
Static Public Member Functions inherited from vtkAlgorithm | |
static vtkAlgorithm * | New () |
static vtkTypeBool | IsTypeOf (const char *type) |
static vtkAlgorithm * | SafeDownCast (vtkObjectBase *o) |
static vtkInformationIntegerKey * | INPUT_IS_OPTIONAL () |
Keys used to specify input port requirements. | |
static vtkInformationIntegerKey * | INPUT_IS_REPEATABLE () |
static vtkInformationInformationVectorKey * | INPUT_REQUIRED_FIELDS () |
static vtkInformationStringVectorKey * | INPUT_REQUIRED_DATA_TYPE () |
static vtkInformationInformationVectorKey * | INPUT_ARRAYS_TO_PROCESS () |
static vtkInformationIntegerKey * | INPUT_PORT () |
static vtkInformationIntegerKey * | INPUT_CONNECTION () |
static vtkInformationIntegerKey * | CAN_PRODUCE_SUB_EXTENT () |
This key tells the executive that a particular output port is capable of producing an arbitrary subextent of the whole extent. | |
static vtkInformationIntegerKey * | CAN_HANDLE_PIECE_REQUEST () |
Key that tells the pipeline that a particular algorithm can or cannot handle piece request. | |
static void | SetDefaultExecutivePrototype (vtkExecutive *proto) |
If the DefaultExecutivePrototype is set, a copy of it is created in CreateDefaultExecutive() using NewInstance(). | |
Static Public Member Functions inherited from vtkObject | |
static vtkObject * | New () |
Create an object with Debug turned off, modified time initialized to zero, and reference counting on. | |
static void | BreakOnError () |
This method is called when vtkErrorMacro executes. | |
static void | SetGlobalWarningDisplay (int val) |
This is a global flag that controls whether any debug, warning or error messages are displayed. | |
static void | GlobalWarningDisplayOn () |
This is a global flag that controls whether any debug, warning or error messages are displayed. | |
static void | GlobalWarningDisplayOff () |
This is a global flag that controls whether any debug, warning or error messages are displayed. | |
static int | GetGlobalWarningDisplay () |
This is a global flag that controls whether any debug, warning or error messages are displayed. | |
Static Public Member Functions inherited from vtkObjectBase | |
static vtkTypeBool | IsTypeOf (const char *name) |
Return 1 if this class type is the same type of (or a subclass of) the named class. | |
static vtkIdType | GetNumberOfGenerationsFromBaseType (const char *name) |
Given a the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). | |
static vtkObjectBase * | New () |
Create an object with Debug turned off, modified time initialized to zero, and reference counting on. | |
static void | SetMemkindDirectory (const char *directoryname) |
The name of a directory, ideally mounted -o dax, to memory map an extended memory space within. | |
static bool | GetUsingMemkind () |
A global state flag that controls whether vtkObjects are constructed in the usual way (the default) or within the extended memory space. | |
Public Attributes inherited from vtkAlgorithm | |
vtkTypeBool | AbortExecute |
Static Protected Member Functions inherited from vtkAlgorithm | |
static vtkInformationIntegerKey * | PORT_REQUIREMENTS_FILLED () |
Static Protected Member Functions inherited from vtkObjectBase | |
static vtkMallocingFunction | GetCurrentMallocFunction () |
static vtkReallocingFunction | GetCurrentReallocFunction () |
static vtkFreeingFunction | GetCurrentFreeFunction () |
static vtkFreeingFunction | GetAlternateFreeFunction () |
Static Protected Attributes inherited from vtkAlgorithm | |
static vtkExecutive * | DefaultExecutivePrototype |
Imprint the contact surface of one object onto another surface.
This filter imprints the contact surface of one vtkPolyData mesh onto a second, input vtkPolyData mesh. There are two inputs to the filter: the target, which is the surface to be imprinted, and the imprint, which is the object imprinting the target.
A high level overview of the algorithm is as follows. 1) The target cells are segregated into two subsets: those that may intersect the imprint surface (the candidate cells determined by bounding box checks), and those that do not. 2) The non-candidates are sent to the output, the candidate intersection cells are further proceesed - eventually they will be triangulated as a result of contact with the imprint, with the result of the triangulation appended to the output. 3) The imprint points are projected onto the candidate cells, determining a classification (on a target point, on a target edge, interior to a target cell, outside the target). 4) The non-outside imprint points are associated with one or more target cells. 5) The imprint edges are intersected with the target cell edges, producing additional points associated with the the candidate cells, as well as "fragments" or portions of edges associated with the candidate target cells. 6) On a per-candidate-target-cell basis, the points and edge fragments associated with that cell are used to triangulate the cell. 7) Finally, the triangulated target cells are appended to the output.
Several options exist toSpecify whether to produce an output cell data array that indicates whether the output cells are in the imprinted area. If enabled, this output vtkCharArray will have a value=1 for cells that are in the imprinted area. Otherwise, the value=0 is indicating the cell is not in contact with the imprinted area. The name of this cell data array is "ImprintedCells".
Some notes: – The algorithm assumes that the input target and imprint cells are convex. – If performing a PROJECTED_IMPRINT, the output is the imprint mesh with the point coordinates modified by projecting the imprint points onto the target. If the profection of an imprint point onto the target is unsuccessful, the imprint point coordinates are not modified. – If performing a MERGED_IMPRINT, the number of output points is (numTargetPts + numImprintPts + numEdgeIntPts). – Not all of the output points may be used, for example if an imprint point is coincident (within the tolerance) of a target point, the target point replaces the imprint point. – Candidate cells which may reside within the bounding box of the imprint but may not actually intersect the imprint will be appended to the output without triangulation. – Candidate cells that are intersected will be triangulated: i.e., triangles will be produced and appended to the output. – Triangulation requires combining the points and edge fragments associated with each target candidate cell, as well as the candidate cell's defining points and edges, to produce the final triangulation. – Portions of the algorithm are SMP threaded. For example, steps #1 and #2 (candidate segregation); point projection step #3; cell triangulation step #6. Future implementations may further parallelize the algorithm. – The algorithm produces an output cell data array that indicates which output cells are in the imprinted area. This vtkCharArray has a value=0 for cells that were originally target cells; a value=2 for output cells that are in the imprinted region; and a value=1 for cells that are in the transition region (between target and imprinted cells). The name of this cell data array is "ImprintedCells".
Definition at line 87 of file vtkImprintFilter.h.
Standard methods to instantiate, print and provide type information.
Definition at line 95 of file vtkImprintFilter.h.
Enumerator | |
---|---|
ABSOLUTE | |
RELATIVE_TO_PROJECTION_TOLERANCE | |
RELATIVE_TO_MIN_EDGE_LENGTH |
Definition at line 148 of file vtkImprintFilter.h.
Enumerator | |
---|---|
TARGET_CELLS | |
IMPRINTED_CELLS | |
PROJECTED_IMPRINT | |
IMPRINTED_REGION | |
MERGED_IMPRINT |
Definition at line 176 of file vtkImprintFilter.h.
Enumerator | |
---|---|
NO_DEBUG_OUTPUT | |
TRIANGULATION_INPUT | |
TRIANGULATION_OUTPUT |
Definition at line 221 of file vtkImprintFilter.h.
|
protected |
|
overrideprotected |
|
static |
Standard methods to instantiate, print and provide type information.
|
static |
Standard methods to instantiate, print and provide type information.
|
virtual |
Standard methods to instantiate, print and provide type information.
Reimplemented from vtkPolyDataAlgorithm.
|
static |
Standard methods to instantiate, print and provide type information.
|
protectedvirtual |
Standard methods to instantiate, print and provide type information.
Reimplemented from vtkPolyDataAlgorithm.
vtkImprintFilter * vtkImprintFilter::NewInstance | ( | ) | const |
Standard methods to instantiate, print and provide type information.
|
overridevirtual |
Standard methods to instantiate, print and provide type information.
Reimplemented from vtkPolyDataAlgorithm.
void vtkImprintFilter::SetTargetConnection | ( | vtkAlgorithmOutput * | algOutput | ) |
Specify the first vtkPolyData input connection which defines the surface mesh to imprint (i.e., the target).
vtkAlgorithmOutput * vtkImprintFilter::GetTargetConnection | ( | ) |
void vtkImprintFilter::SetTargetData | ( | vtkDataObject * | target | ) |
Specify the first vtkPolyData input which defines the surface mesh to imprint (i.e., the taregt).
The imprint surface is provided by the second input.
vtkDataObject * vtkImprintFilter::GetTarget | ( | ) |
Specify the first vtkPolyData input which defines the surface mesh to imprint (i.e., the taregt).
The imprint surface is provided by the second input.
void vtkImprintFilter::SetImprintConnection | ( | vtkAlgorithmOutput * | algOutput | ) |
Specify the a second vtkPolyData input connection which defines the surface mesh with which to imprint the target (the target is provided by the first input).
vtkAlgorithmOutput * vtkImprintFilter::GetImprintConnection | ( | ) |
void vtkImprintFilter::SetImprintData | ( | vtkDataObject * | imprint | ) |
Specify the a second vtkPolyData input which defines the surface mesh with which to imprint the target (i.e., the first input).
vtkDataObject * vtkImprintFilter::GetImprint | ( | ) |
Specify the a second vtkPolyData input which defines the surface mesh with which to imprint the target (i.e., the first input).
|
virtual |
Specify a projection tolerance which controls how close the imprint surface must be to the target to successfully imprint the surface.
This is an absolute value.
|
virtual |
Specify a projection tolerance which controls how close the imprint surface must be to the target to successfully imprint the surface.
This is an absolute value.
|
virtual |
Specify a tolerance which is used to determine whether two points are considered coincident to one another.
This is important when performing intersections and projections to reduce numerical issues.
|
virtual |
Specify a tolerance which is used to determine whether two points are considered coincident to one another.
This is important when performing intersections and projections to reduce numerical issues.
|
inline |
Specify a tolerance which is used to determine whether two points are considered coincident to one another.
This is important when performing intersections and projections to reduce numerical issues.
Definition at line 163 of file vtkImprintFilter.h.
|
inline |
Specify a tolerance which is used to determine whether two points are considered coincident to one another.
This is important when performing intersections and projections to reduce numerical issues.
Definition at line 164 of file vtkImprintFilter.h.
|
inline |
Specify a tolerance which is used to determine whether two points are considered coincident to one another.
This is important when performing intersections and projections to reduce numerical issues.
Definition at line 168 of file vtkImprintFilter.h.
|
virtual |
Specify a tolerance which is used to determine whether two points are considered coincident to one another.
This is important when performing intersections and projections to reduce numerical issues.
|
virtual |
Specify a tolerance which is used to determine whether two points are considered coincident to one another.
This is important when performing intersections and projections to reduce numerical issues.
|
virtual |
Control what is output by the filter.
This can be useful for debugging or to extract portions of the data. The choices are: TARGET_CELLS - output the target cells in contact (relative to the tolerance) of the imprint mesh; IMPRINTED_CELLS - output the target's imprinted cells after intersection and triangulation with the imprint mesh; PROJECTED_IMPRINT - project the imprint mesh onto the target mesh, modififying the imprint mesh point coordinates to lie on the target mesh; IMPRINTED_REGION - extract just the area of contact between the target and imprint; and MERGED_IMPRINT - merge the target and imprint mesh after the imprint operation. By default, MERGED_IMPRINT is produced.
|
virtual |
Control what is output by the filter.
This can be useful for debugging or to extract portions of the data. The choices are: TARGET_CELLS - output the target cells in contact (relative to the tolerance) of the imprint mesh; IMPRINTED_CELLS - output the target's imprinted cells after intersection and triangulation with the imprint mesh; PROJECTED_IMPRINT - project the imprint mesh onto the target mesh, modififying the imprint mesh point coordinates to lie on the target mesh; IMPRINTED_REGION - extract just the area of contact between the target and imprint; and MERGED_IMPRINT - merge the target and imprint mesh after the imprint operation. By default, MERGED_IMPRINT is produced.
|
inline |
Control what is output by the filter.
This can be useful for debugging or to extract portions of the data. The choices are: TARGET_CELLS - output the target cells in contact (relative to the tolerance) of the imprint mesh; IMPRINTED_CELLS - output the target's imprinted cells after intersection and triangulation with the imprint mesh; PROJECTED_IMPRINT - project the imprint mesh onto the target mesh, modififying the imprint mesh point coordinates to lie on the target mesh; IMPRINTED_REGION - extract just the area of contact between the target and imprint; and MERGED_IMPRINT - merge the target and imprint mesh after the imprint operation. By default, MERGED_IMPRINT is produced.
Definition at line 201 of file vtkImprintFilter.h.
|
inline |
Control what is output by the filter.
This can be useful for debugging or to extract portions of the data. The choices are: TARGET_CELLS - output the target cells in contact (relative to the tolerance) of the imprint mesh; IMPRINTED_CELLS - output the target's imprinted cells after intersection and triangulation with the imprint mesh; PROJECTED_IMPRINT - project the imprint mesh onto the target mesh, modififying the imprint mesh point coordinates to lie on the target mesh; IMPRINTED_REGION - extract just the area of contact between the target and imprint; and MERGED_IMPRINT - merge the target and imprint mesh after the imprint operation. By default, MERGED_IMPRINT is produced.
Definition at line 202 of file vtkImprintFilter.h.
|
inline |
Control what is output by the filter.
This can be useful for debugging or to extract portions of the data. The choices are: TARGET_CELLS - output the target cells in contact (relative to the tolerance) of the imprint mesh; IMPRINTED_CELLS - output the target's imprinted cells after intersection and triangulation with the imprint mesh; PROJECTED_IMPRINT - project the imprint mesh onto the target mesh, modififying the imprint mesh point coordinates to lie on the target mesh; IMPRINTED_REGION - extract just the area of contact between the target and imprint; and MERGED_IMPRINT - merge the target and imprint mesh after the imprint operation. By default, MERGED_IMPRINT is produced.
Definition at line 203 of file vtkImprintFilter.h.
|
inline |
Control what is output by the filter.
This can be useful for debugging or to extract portions of the data. The choices are: TARGET_CELLS - output the target cells in contact (relative to the tolerance) of the imprint mesh; IMPRINTED_CELLS - output the target's imprinted cells after intersection and triangulation with the imprint mesh; PROJECTED_IMPRINT - project the imprint mesh onto the target mesh, modififying the imprint mesh point coordinates to lie on the target mesh; IMPRINTED_REGION - extract just the area of contact between the target and imprint; and MERGED_IMPRINT - merge the target and imprint mesh after the imprint operation. By default, MERGED_IMPRINT is produced.
Definition at line 204 of file vtkImprintFilter.h.
|
inline |
Control what is output by the filter.
This can be useful for debugging or to extract portions of the data. The choices are: TARGET_CELLS - output the target cells in contact (relative to the tolerance) of the imprint mesh; IMPRINTED_CELLS - output the target's imprinted cells after intersection and triangulation with the imprint mesh; PROJECTED_IMPRINT - project the imprint mesh onto the target mesh, modififying the imprint mesh point coordinates to lie on the target mesh; IMPRINTED_REGION - extract just the area of contact between the target and imprint; and MERGED_IMPRINT - merge the target and imprint mesh after the imprint operation. By default, MERGED_IMPRINT is produced.
Definition at line 205 of file vtkImprintFilter.h.
|
virtual |
Indicate whether to insert just the boundary edges of the imprint mesh (i.e., do not insert the interior edges).
(Boundary edges are mesh edges used by exactly one cell.) If inserting boundary edges, the imprint operation is similar to a cookie cutter operation. By default, boundary edge insertion is off.
|
virtual |
Indicate whether to insert just the boundary edges of the imprint mesh (i.e., do not insert the interior edges).
(Boundary edges are mesh edges used by exactly one cell.) If inserting boundary edges, the imprint operation is similar to a cookie cutter operation. By default, boundary edge insertion is off.
|
virtual |
Indicate whether to insert just the boundary edges of the imprint mesh (i.e., do not insert the interior edges).
(Boundary edges are mesh edges used by exactly one cell.) If inserting boundary edges, the imprint operation is similar to a cookie cutter operation. By default, boundary edge insertion is off.
|
virtual |
Indicate whether to insert just the boundary edges of the imprint mesh (i.e., do not insert the interior edges).
(Boundary edges are mesh edges used by exactly one cell.) If inserting boundary edges, the imprint operation is similar to a cookie cutter operation. By default, boundary edge insertion is off.
|
virtual |
Indicate whether the output should be triangulated.
By default (i.e., TriangulateOutputOff) the imprint cells, if not triangles nor intersect target cell boundaries, will not be triangulated. (Cells in the transition region are always triangulated because they are typically concave.)
|
virtual |
Indicate whether the output should be triangulated.
By default (i.e., TriangulateOutputOff) the imprint cells, if not triangles nor intersect target cell boundaries, will not be triangulated. (Cells in the transition region are always triangulated because they are typically concave.)
|
virtual |
Indicate whether the output should be triangulated.
By default (i.e., TriangulateOutputOff) the imprint cells, if not triangles nor intersect target cell boundaries, will not be triangulated. (Cells in the transition region are always triangulated because they are typically concave.)
|
virtual |
Indicate whether the output should be triangulated.
By default (i.e., TriangulateOutputOff) the imprint cells, if not triangles nor intersect target cell boundaries, will not be triangulated. (Cells in the transition region are always triangulated because they are typically concave.)
|
virtual |
The following methods support debugging.
By default, NO_DEBUG_OUTPUT is produced and the second output of this filter is empty. If TRIANGULATION_INPUT is set, then the input points and edges contained by the target DebugCellId are output to the second output to this filter. If TRIANGULATION_OUTPUT is set, then the output triangulation for the specified target cellId is placed in a second output to this filter.
|
virtual |
Indicate whether the output should be triangulated.
By default (i.e., TriangulateOutputOff) the imprint cells, if not triangles nor intersect target cell boundaries, will not be triangulated. (Cells in the transition region are always triangulated because they are typically concave.)
|
inline |
Indicate whether the output should be triangulated.
By default (i.e., TriangulateOutputOff) the imprint cells, if not triangles nor intersect target cell boundaries, will not be triangulated. (Cells in the transition region are always triangulated because they are typically concave.)
Definition at line 252 of file vtkImprintFilter.h.
|
inline |
Indicate whether the output should be triangulated.
By default (i.e., TriangulateOutputOff) the imprint cells, if not triangles nor intersect target cell boundaries, will not be triangulated. (Cells in the transition region are always triangulated because they are typically concave.)
Definition at line 253 of file vtkImprintFilter.h.
|
inline |
Indicate whether the output should be triangulated.
By default (i.e., TriangulateOutputOff) the imprint cells, if not triangles nor intersect target cell boundaries, will not be triangulated. (Cells in the transition region are always triangulated because they are typically concave.)
Definition at line 254 of file vtkImprintFilter.h.
|
virtual |
Indicate whether the output should be triangulated.
By default (i.e., TriangulateOutputOff) the imprint cells, if not triangles nor intersect target cell boundaries, will not be triangulated. (Cells in the transition region are always triangulated because they are typically concave.)
|
virtual |
Indicate whether the output should be triangulated.
By default (i.e., TriangulateOutputOff) the imprint cells, if not triangles nor intersect target cell boundaries, will not be triangulated. (Cells in the transition region are always triangulated because they are typically concave.)
vtkPolyData * vtkImprintFilter::GetDebugOutput | ( | ) |
Get the output data (in the second output, if the DebugOutput != NO_DEBUG_OUTPUT).
|
protected |
|
overrideprotectedvirtual |
This is called by the superclass.
This is the method you should override.
Reimplemented from vtkPolyDataAlgorithm.
|
overrideprotectedvirtual |
This is called by the superclass.
This is the method you should override.
Reimplemented from vtkPolyDataAlgorithm.
|
protected |
Definition at line 271 of file vtkImprintFilter.h.
|
protected |
Definition at line 272 of file vtkImprintFilter.h.
|
protected |
Definition at line 273 of file vtkImprintFilter.h.
|
protected |
Definition at line 276 of file vtkImprintFilter.h.
|
protected |
Definition at line 277 of file vtkImprintFilter.h.
|
protected |
Definition at line 278 of file vtkImprintFilter.h.
|
protected |
Definition at line 280 of file vtkImprintFilter.h.
|
protected |
Definition at line 281 of file vtkImprintFilter.h.