Class for drawing 3D primitives to a graphical context. More...

#include <vtkContext3D.h>

Inheritance diagram for vtkContext3D:

Collaboration diagram for vtkContext3D:

Public Types
typedef vtkObject	Superclass

Public Member Functions
virtual vtkTypeBool	IsA (const char *type)
	Return 1 if this class is the same type of (or a subclass of) the named class. More...

vtkContext3D *	NewInstance () const

void	PrintSelf (ostream &os, vtkIndent indent) override
	Methods invoked by print to print information about the object including superclasses. More...

bool	Begin (vtkContextDevice3D *device)
	Begin painting on a vtkContextDevice3D, no painting can occur before this call has been made. More...

vtkContextDevice3D *	GetDevice ()
	Get access to the underlying 3D context. More...

bool	End ()
	Ends painting on the device, you would not usually need to call this as it should be called by the destructor. More...

void	DrawLine (const vtkVector3f &start, const vtkVector3f &end)
	Draw a line between the specified points. More...

void	DrawPoly (const float *points, int n)
	Draw a poly line between the specified points. More...

void	DrawPoint (const vtkVector3f &point)
	Draw a point at the point in 3D space. More...

void	DrawPoints (const float *points, int n)
	Draw a sequence of points at the specified locations. More...

void	DrawPoints (const float points, int n, unsigned char colors, int nc_comps)
	Draw a sequence of points at the specified locations. More...

void	DrawTriangleMesh (const float mesh, int n, const unsigned char colors, int nc)
	Draw triangles to generate the specified mesh. More...

void	ApplyPen (vtkPen *pen)
	Apply the supplied pen which controls the outlines of shapes, as well as lines, points and related primitives. More...

void	ApplyBrush (vtkBrush *brush)
	Apply the supplied brush which controls the outlines of shapes, as well as lines, points and related primitives. More...

void	SetTransform (vtkTransform *transform)
	Set the transform for the context, the underlying device will use the matrix of the transform. More...

vtkTransform *	GetTransform ()
	Compute the current transform applied to the context. More...

void	AppendTransform (vtkTransform *transform)
	Append the transform for the context, the underlying device will use the matrix of the transform. More...


void	PushMatrix ()
	Push/pop the transformation matrix for the painter (sets the underlying matrix for the device when available). More...

void	PopMatrix ()
	Push/pop the transformation matrix for the painter (sets the underlying matrix for the device when available). More...


void	EnableClippingPlane (int i, double *planeEquation)
	Enable/Disable the specified clipping plane. More...

void	DisableClippingPlane (int i)
	Enable/Disable the specified clipping plane. More...

Public Member Functions inherited from vtkObject
	vtkBaseTypeMacro (vtkObject, vtkObjectBase)

virtual void	DebugOn ()
	Turn debugging output on. More...

virtual void	DebugOff ()
	Turn debugging output off. More...

bool	GetDebug ()
	Get the value of the debug flag. More...

void	SetDebug (bool debugFlag)
	Set the value of the debug flag. More...

virtual void	Modified ()
	Update the modification time for this object. More...

virtual vtkMTimeType	GetMTime ()
	Return this object's modified time. More...

void	RemoveObserver (unsigned long tag)

void	RemoveObservers (unsigned long event)

void	RemoveObservers (const char *event)

void	RemoveAllObservers ()

vtkTypeBool	HasObserver (unsigned long event)

vtkTypeBool	HasObserver (const char *event)

int	InvokeEvent (unsigned long event)

int	InvokeEvent (const char *event)

unsigned long	AddObserver (unsigned long event, vtkCommand *, float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

unsigned long	AddObserver (const char event, vtkCommand , float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkCommand *	GetCommand (unsigned long tag)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObserver (vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObservers (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObservers (const char event, vtkCommand )
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkTypeBool	HasObserver (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkTypeBool	HasObserver (const char event, vtkCommand )
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::callback)(vtkObject , unsigned long, void *), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, bool(T::callback)(vtkObject , unsigned long, void *), float priority=0.0f)
	Allow user to set the AbortFlagOn() with the return value of the callback method. More...

int	InvokeEvent (unsigned long event, void *callData)
	This method invokes an event and return whether the event was aborted or not. More...

int	InvokeEvent (const char event, void callData)
	This method invokes an event and return whether the event was aborted or not. More...

Public Member Functions inherited from vtkObjectBase
const char *	GetClassName () const
	Return the class name as a string. More...

virtual void	Delete ()
	Delete a VTK object. More...

virtual void	FastDelete ()
	Delete a reference to this object. More...

void	InitializeObjectBase ()

void	Print (ostream &os)
	Print an object to an ostream. More...

virtual void	Register (vtkObjectBase *o)
	Increase the reference count (mark as used by another object). More...

virtual void	UnRegister (vtkObjectBase *o)
	Decrease the reference count (release by another object). More...

int	GetReferenceCount ()
	Return the current reference count of this object. More...

void	SetReferenceCount (int)
	Sets the reference count. More...

void	PrintRevisions (ostream &)
	Legacy. More...

virtual void	PrintHeader (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses. More...

virtual void	PrintTrailer (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses. More...

Static Public Member Functions
static vtkTypeBool	IsTypeOf (const char *type)

static vtkContext3D *	SafeDownCast (vtkObjectBase *o)

static vtkContext3D *	New ()
	Creates a 3D context object. More...

Static Public Member Functions inherited from vtkObject
static vtkObject *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...

static void	BreakOnError ()
	This method is called when vtkErrorMacro executes. More...

static void	SetGlobalWarningDisplay (int val)
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static void	GlobalWarningDisplayOn ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static void	GlobalWarningDisplayOff ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static int	GetGlobalWarningDisplay ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

Static Public Member Functions inherited from vtkObjectBase
static vtkTypeBool	IsTypeOf (const char *name)
	Return 1 if this class type is the same type of (or a subclass of) the named class. More...

static vtkObjectBase *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...

Protected Member Functions
virtual vtkObjectBase *	NewInstanceInternal () const

	vtkContext3D ()

	~vtkContext3D () override

Protected Member Functions inherited from vtkObject
	vtkObject ()

	~vtkObject () override

void	RegisterInternal (vtkObjectBase *, vtkTypeBool check) override

void	UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override

void	InternalGrabFocus (vtkCommand mouseEvents, vtkCommand keypressEvents=nullptr)
	These methods allow a command to exclusively grab all events. More...

void	InternalReleaseFocus ()
	These methods allow a command to exclusively grab all events. More...

Protected Member Functions inherited from vtkObjectBase
	vtkObjectBase ()

virtual	~vtkObjectBase ()

virtual void	CollectRevisions (ostream &)

virtual void	ReportReferences (vtkGarbageCollector *)

	vtkObjectBase (const vtkObjectBase &)

void	operator= (const vtkObjectBase &)

Protected Attributes
vtkSmartPointer< vtkContextDevice3D >	Device

vtkSmartPointer< vtkTransform >	Transform

Protected Attributes inherited from vtkObject
bool	Debug

vtkTimeStamp	MTime

vtkSubjectHelper *	SubjectHelper

Protected Attributes inherited from vtkObjectBase
vtkAtomicInt32	ReferenceCount

vtkWeakPointerBase **	WeakPointers

Detailed Description

Class for drawing 3D primitives to a graphical context.

This defines the interface for drawing onto a 3D context. The context must be set up with a vtkContextDevice3D derived class that provides the functions to facilitate the low level calls to the context. Currently only an OpenGL based device is provided.

Definition at line 40 of file vtkContext3D.h.

Member Typedef Documentation

typedef vtkObject vtkContext3D::Superclass

Definition at line 43 of file vtkContext3D.h.

Constructor & Destructor Documentation

vtkContext3D::vtkContext3D ( )

protected

vtkContext3D::~vtkContext3D ( )

overrideprotected

Member Function Documentation

static vtkTypeBool vtkContext3D::IsTypeOf ( const char * type )

static

virtual vtkTypeBool vtkContext3D::IsA ( const char * name )

virtual

Return 1 if this class is the same type of (or a subclass of) the named class.

Returns 0 otherwise. This method works in combination with vtkTypeMacro found in vtkSetGet.h.

Reimplemented from vtkObjectBase.

static vtkContext3D* vtkContext3D::SafeDownCast ( vtkObjectBase * o )

static

virtual vtkObjectBase* vtkContext3D::NewInstanceInternal ( ) const

protectedvirtual

vtkContext3D* vtkContext3D::NewInstance ( ) const

void vtkContext3D::PrintSelf	(	ostream &	os,
		vtkIndent	indent
	)

overridevirtual

Methods invoked by print to print information about the object including superclasses.

Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes.

Reimplemented from vtkObject.

static vtkContext3D* vtkContext3D::New ( )

static

Creates a 3D context object.

bool vtkContext3D::Begin ( vtkContextDevice3D * device )

Begin painting on a vtkContextDevice3D, no painting can occur before this call has been made.

Only one painter is allowed at a time on any given paint device. Returns true if successful, otherwise false.

vtkContextDevice3D* vtkContext3D::GetDevice ( )

Get access to the underlying 3D context.

bool vtkContext3D::End ( )

Ends painting on the device, you would not usually need to call this as it should be called by the destructor.

Returns true if the painter is no longer active, otherwise false.

void vtkContext3D::DrawLine	(	const vtkVector3f &	start,
		const vtkVector3f &	end
	)

Draw a line between the specified points.

void vtkContext3D::DrawPoly	(	const float *	points,
		int	n
	)

Draw a poly line between the specified points.

void vtkContext3D::DrawPoint ( const vtkVector3f & point )

Draw a point at the point in 3D space.

void vtkContext3D::DrawPoints	(	const float *	points,
		int	n
	)

Draw a sequence of points at the specified locations.

void vtkContext3D::DrawPoints	(	const float *	points,
		int	n,
		unsigned char *	colors,
		int	nc_comps
	)

Draw a sequence of points at the specified locations.

The points will be colored by the colors array, which must have nc_comps components (defining a single color).

void vtkContext3D::DrawTriangleMesh	(	const float *	mesh,
		int	n,
		const unsigned char *	colors,
		int	nc
	)

Draw triangles to generate the specified mesh.

void vtkContext3D::ApplyPen ( vtkPen * pen )

Apply the supplied pen which controls the outlines of shapes, as well as lines, points and related primitives.

This makes a deep copy of the vtkPen object in the vtkContext2D, it does not hold a pointer to the supplied object.

void vtkContext3D::ApplyBrush ( vtkBrush * brush )

Apply the supplied brush which controls the outlines of shapes, as well as lines, points and related primitives.

This makes a deep copy of the vtkBrush object in the vtkContext2D, it does not hold a pointer to the supplied object.

void vtkContext3D::SetTransform ( vtkTransform * transform )

Set the transform for the context, the underlying device will use the matrix of the transform.

Note, this is set immediately, later changes to the matrix will have no effect until it is set again.

vtkTransform* vtkContext3D::GetTransform ( )

Compute the current transform applied to the context.

void vtkContext3D::AppendTransform ( vtkTransform * transform )

Append the transform for the context, the underlying device will use the matrix of the transform.

Note, this is set immediately, later changes to the matrix will have no effect until it is set again. The matrix of the transform will multiply the current context transform.

void vtkContext3D::PushMatrix ( )

Push/pop the transformation matrix for the painter (sets the underlying matrix for the device when available).

void vtkContext3D::PopMatrix ( )

Push/pop the transformation matrix for the painter (sets the underlying matrix for the device when available).

void vtkContext3D::EnableClippingPlane	(	int	i,
		double *	planeEquation
	)

Enable/Disable the specified clipping plane.

i is the index of the clipping plane being enabled or disabled (0 - 5). planeEquation points to the four coefficients of the equation for the clipping plane: Ax + By + Cz + D = 0. This is the equation format expected by glClipPlane.

void vtkContext3D::DisableClippingPlane ( int i )

Enable/Disable the specified clipping plane.

i is the index of the clipping plane being enabled or disabled (0 - 5). planeEquation points to the four coefficients of the equation for the clipping plane: Ax + By + Cz + D = 0. This is the equation format expected by glClipPlane.